» Installation & Operation

Easy to install  and the system is simple to operate. A wireless, tire air pressure sensor (cap) simply screws onto the valve stem replacing the dust cap. The Monitor is 12 volt powered hard wired to the motorcycle battery and displays current tire pressure at 2 second intervals to each wheel programmed as well as alerting to low tire pressures with a visual warning. The sensors constantly read the tire pressure and transmit low-pressure readings immediately when they occur. When tire pressure is low, the monitor identifies the low tire position with a flashing light on that location and a visual alarm to alert to low pressure.

View the official PressurePro™ Installation Guide

» Perfomance Matters

PressurePro™ continuously monitors tire pressure to assist in maximizing  motorcycle handling, braking, acceleration and tire life. The early detection of low tire pressures improves the possibility of repair and reduces the risk of permanent tire or wheel damage.

PressurePro™ is an investment in your motorcycle and in your own safety and the safety of those with you. PressurePro™ gives you confidence in your tires performance and peace of mind while riding.